BTL13 vertical eyewash station (linked flip basin)

Production Standard: ANSI Z358.1-2014

● Function: Eyewash

● Nominal Pressure: 1.0 MPa

● Operating Pressure: 0.2-0.4 MPa

● Eyewash Flow Rate: ≥11.4 L/min

● Eyewash Head Height: 930 mm

● Water Inlet: RC 1/2 x 760 mm

● Drain Outlet: RC 1-1/4 x 98 mm

● Gross Weight: 9 kg

● Net Weight: 7.5 kg

● Packaging Dimensions: L*W*H = 750*400*260 mm

● Product Dimensions: L*W*H = 360*330*1080 mm

● Medium: Domestic water at room temperature that meets hygienic standards

● Main Material: Special SS304 stainless steel that meets national standards. After pickling and passivation, it offers enhanced corrosion resistance to acids, alkalis, salts, and oils compared to unpickled SS304 stainless steel.

The casting is cast using a silica sol process, eliminating defects such as pinholes and pores. Compared to sand casting, it offers higher density and strength, resulting in a longer service life.

●Eyewash Switch Structure and Features: The eyewash switch utilizes a stainless steel ball valve with low operating torque, allowing for quick opening and ideal for emergency use. It offers excellent wear resistance and sealing properties, ensuring effective operation.

It boasts a lifespan of over 300,000 cycles, effectively reducing maintenance costs.

●Eyewash Hand Valve Open/Close: Manually open the eyewash basin lid to automatically dispense clean water. Close the lid after use, and the eyewash switch automatically shuts off.

Once the eyewash switch is on, it will not automatically shut off unless manually operated.

● Eyewash Basin Material: Brand new, high-quality, non-toxic ASA modified plastic, treated for acid, alkali, and weather resistance. It resists fading and aging, offering a long service life and excellent weather resistance. It can withstand temperatures as low as -45°C and remains operational even in extremely low-temperature environments. It is also resistant to corrosion from strong acids, alkalis, salts, oils, and other chemicals, making it suitable for outdoor use and harsh environments. The eyewash basin cover protects the eyewash nozzle and the entire basin from dust, ensuring cleanliness.

● Eyewash Head: The eyewash head has a built-in multi-layer filter that effectively filters impurities from the water, creating a foamy stream of water. This effectively prevents secondary damage to the eye nerves and injured areas caused by impurities or excessive water flow. The filter is easily removable for simple cleaning and maintenance.

This product is suitable for use in environments with temperatures above 0°C. When used in environments with temperatures of 0°C or below, attention should be paid to the antifreeze and heat preservation of the pipes.